Pages

Monday, May 31, 2010

SAP Business Workflow Interview Questions, Answers,

SAP Business
Workflow Interview
Questions, Answers,
and Explanations

- 7 -
Part I: SAP Business
Workflow FAQ
SAP Business Workflow Interview Questions
- 8 -
Question 1: Clarification on PR
Item release
For a PR Item level release, the standard workflow
works like this:
For a 3 level release, the workflow goes from level 1 to
level 3. In case of any rejections in-between, the
rejection workflow goes back to Level 1, who will then
release the refusal. This will send the workflow back
to the level it was rejected at.
The requirement is now to make the workflow go in
the exact reverse order, i.e.
Once Level 3 rejects, workflow goes back to level 2;
When Level 2 resets its release and rejects, workflow
goes back to Level 1;
When Level 1 resets its release, makes the necessary
changes, and resubmits the PR, it flows up to level 2;
And so forth.
Is this scenario possible with the standard workflow
and BUS2009 events?
A: If there is a rejection at any point, you can utilize
the workflow release strategy. This will enable the
release on a step by step level. For example:
If rejected at 3;
Reset strategy to initial level.
SAP Business Workflow Interview Questions
- 9 -
If released at 1 in background;
Go to 2 and stop.
You will need to keep track of the value where it was
rejected. From there,
you can then create your own custom method for that
based in the bus2009.singlerelease.
SAP Business Workflow Interview Questions
- 10 -
Question 2: Undelete Work items
Undelete Work items in SAP workflow
Is there anyway to undelete work items in SAP
workflow after I have logically deleted them already?
A. No. What you can do is restart the workflow using
SWUE. This will be the same as recreating the
workflow because it will start at the point where it has
logically been deleted.
SAP Business Workflow Interview Questions
- 11 -
Question 3: Workflow completing
prematurely
WF starts on creating a Service notification IW51 BUS
obj 2080 -- method Create.
This works fine in starting the Workflow. However, I
only want the workflow to register completion when
the notification is set at CLOSED (Bus 2080 event
CLOSED). This is because I have an asynchronous
edit task with a terminating function CLOSED.
Usually, the original and current setup works fine (for
example if anybody executes IW52 outside the normal
workflow the workflow is marked complete).
However if any of the agents execute a the work item
in the inbox and don't close the notification -i.e. just
to come in and edit the notification (IW52) without
closing the notification properly, the work item still is
marked complete.
This should not happen until the notification is closed.
Is there any way to re-submit the work item to the
inbox for completion?
A. Add a 'loop until' to the step that is sent to the
agent and program to loop until the status is CLOSED.
If the status is not closed after the agent processes,
SAP Business Workflow Interview Questions
- 12 -
then your WF will loop back to the step that sends the
work item to the respective agent.
SAP Business Workflow Interview Questions
- 13 -
Question 4: ESS Leave request
I encountered an issue while executing an ESS
employee leave request (WS20000081). To explain
further, when an employee creates a leave request
through ESS, it goes to his manager. If the request is
logon to R/3 and his manager approves the leave
request through the same R/3 workplace, the request
goes back out from that screen. This scenario works
fine. However, the problem starts when I do the same
request from his manager’s portal and I press the
"Approve" button, I get the message saying
"Information sent successfully". I will then press the
“OK” button, and then press the button "Quit". When
I double checked, the workflow is still sitting at the
manager’s inbox. My question is why doesn’t this
work from the manager’s portal when the same
function is working inside the R/3?
A. If you are approving from the ESS which is
deployed in Enterprise Portal, you should also deploy
Universal Work List. It is only then that the Leave
Approvals will work properly.
SAP Business Workflow Interview Questions
- 14 -
Question 5: Pop up message for
workflow
How do you set up a user to receive a pop-up
reminder when he/she gets a new WF message?
A. You can accomplish this by setting up the work
item priority to the highest level.
Question 6: Timed events
Is it possible to create timed events?
A. You may consider using deadline monitoring
facilities. For example:
Requested start, requested end;
Latest start or latest end on tasks;
Apply whichever may be applicable to your case.
SAP Business Workflow Interview Questions
- 15 -
Question 7: User Alternative in
Workflow
Can I define (or assign) an alternative person in the
workflow? For example if I delete a user who is in my
workflow list, is it possible that the slot for the
workflow be diverted to an alternate user?
A corollary question is - is it also possible to substitute
a user who has been deleted by another user without
the workflow getting affected? If this is possible, how
can this be achieved?
A. You can setup substitution rules but not for
deleted userIDs. Generally, substitutions are setup by
the person who needs to be replaced (and only for a
period of time). I think your best solution is to define
a RULE that looks for the userID. If it's not valid, then
build some additional logic that tells it who to look for
next. Of course, a more central solution is to define a
'WORKCENTER' HR object and assign all the possible
agents to this work center. Then set this work center
as the agent of the task.
SAP Business Workflow Interview Questions
- 16 -
Question 8: Workflow for PB40
How do you set the workflow in the transaction PB40
of HR for functional mobility?
A. The only standard WF that comes close is
200038 but it could be too robust for what you are
trying to achieve. You may want to create your own
WF and (at some point) call the method APPLICANTEVENTCREATE.
This method is similar to PB40 but
without the first screen.
Question 9: Plant Maintenance
Notification
I am currently using a standard task TS 00008314
(BUS2038) to launch work flow when notification is
created. Given this, how can I define notification type
(only M1)? Subsequently, how I can launch a pop up
or express message when notification is created.
A. You can create a start condition (transaction:
SWB_COND) and set it to start if the notification type
SAP Business Workflow Interview Questions
- 17 -
is M1. Just make sure to document this because
months from now you might not remember why it
starts selectively for some and not others.
For the second question - if you are trying to notify
the agent that they have a task, then try placing this
standard task into a custom 2 step workflow template.
The first step of the template should send an express
mail then the next step should automatically send the
task.
Question 10: Downloading
Workflows
Is it possible to download my workflows?
A. Yes it is. From the workflow builder menu, choose
Workflow > Import/Export and export to an XML file.
You can also import from an XML file into a different
system in which case the builder will create a new
workflow in a 'New, Not Saved' status. Then when you
save it, it will assign the unique IDs for the workflow
and each task.
You might also consider getting the program logic for
any custom business objects. You can do this by going
to the basic data of the business object and doubleclick
the program name. From here, you can choose
download from the utilities menu to get the program
which includes the custom methods, attributes, etc.
SAP Business Workflow Interview Questions
- 18 -
Question 11: User assignment
Maintaining user assignment in standard role
– extending assignment date
It is a policy in our company that the Security
Department extends the user validity period of each
user ID every year end i.e. from 12.31.2005 to
12.31.2006. We have to do this manually every year
and this year, I was trying to find out how to assign
the validity period to a much later date than the usual
annual cut off. Is there a better way to configure this
without going through each user ID manually?
A. You can follow these steps:
1. Go to transaction PSO4 (Maintain Infotype);
2. Then go to Object Type - RY (Responsibility);
3. Proceed to Object ID - This is the organizational id
of your responsibility. The abbreviation will be the
same as that of your rule. Use F4 to get the ID.
4. Execute and change the infotype, selecting 1001
(Relationships). Change the validity here.
Lastly, you might need to wrap the whole operation in
a BDC or something for automation.
SAP Business Workflow Interview Questions
- 19 -
Question 12: Position Basis
Is Workflow position based?
Is it true that workflow is position based and not
person based? Does it mean that when a user quits a
job, the workflow will not be affected?
A. Yes, Workflow is position based. Therefore any
turnover will not affect the workflow unless the
person who has quit the job is the only person for the
position you are talking about. Check the transaction
as reference for PPOCE/PPOME for organizational
structures.
SAP Business Workflow Interview Questions
- 20 -
Question 13: Approval workflow
I would like to implement the SAP Standard Workflow
for the release of purchase acquisitions. I have access
to OSS but I need a detailed guide in implementing
the SAP standard. Is there documentation for the
configuration of an Approval Workflow?
A. There is an SAP Online help that you can use for a
detailed documentation in configuring an Approval
Workflow. You can use this link:
http://help.sap.com/saphelp_46c/helpdata/en/33/4c
9a34272a5f2ee10000009b38f83b/frameset.htm
In the first chapter, “Releasing a Purchase
Requisition”, there is technical information, process
overview and the standard SAP workflows for the
purchase release process. This will start you off.
SAP Business Workflow Interview Questions
- 21 -
Question 14: Remove object type
I have created a situation wherein the ‘Z’ object in
‘SWO1’ was transposed to ‘obsolete’ by mistake. After
this, I am not able to edit the object anymore. This
message appears each time I try to delete the obsolete
misstep:
“Obsolete object types cannot be changed again.”
How can I reverse the mistake?
A. You can change the status in table TOJTB > Field
OBSOLETE and the object can be edited again.
However, this is not recommended and there might be
unknown implications.
SAP Business Workflow Interview Questions
- 22 -
Question 15: Workflow for
releasing requisitions
I am currently working on creating a release
procedure with workflow for requisitions purposes. I
have completed the release strategies and formulated
an organizational plan. I was able to maintain the
workflow parameters in transaction OMGQ. For each
release code I used object type position (S) and I
assigned the corresponding position ID from the
organizational plan. When I pose a requisition, the
strategy seems to be correctly assigned. However,
workflow itself is not activated. Are there any more
settings that I need to maintain to activate SAP
standard workflow for releasing requisitions?
In my business workplace I see the message:
“Workflow Wizard 'DYNAMICHIERARCHICAL':
Create initialization.”
When I double clicked on this message I get the error
message:
“Prefix number: entry missing for system DEV".
How do I resolve this issue?
A. You will need to do two things to fix this.
1. Run AUTOMATIC customizing;
SAP Business Workflow Interview Questions
- 23 -
2. You need to define the prefix numbers for the
workflow definition time;
SAP Business Workflow Interview Questions
- 24 -
Question 16: Alternative
Approvers
How can I re-route a PO/PR to an alternate approver?
A. Go to “Latest end” tab in workflow step
properties. From there set the deadline parameters
including a recipient for missed deadline items.
Alternatives will then be set.
Question 17: Workflow not
triggered
How do I ensure that training and event workflow is
automatically triggered? When I test the object
through SWUE, I am able to see the event log.
However, it is not getting through T Code. I also tried
it in SWE2 but I got the same results. How can this be
configured correctly?
A. You already started troubleshooting in the right
track. Continue on and check the linkage if it is active
or not. After that, it will trigger automatically.
SAP Business Workflow Interview Questions
- 25 -
Question 18: Workflow sent to
Every Agent
Why are workflow items sent to everyone if
agent is not determined?
Why is it that the workflow items are sent to everyone
if agent is not specified?
I tried to go thru "PFTC_CHG" transaction by
specifying the task (20000460), and under "default
values" Tab, the agent is defined with rule 157.
What other steps do I need to take to clarify the tasks?
A. This is generally a two part issue and there are
two possible solutions:
1. Instead of making it a general task, try to identify an
actual list of 'possible' agents. This could be based
positions, user IDs, Org Units, etc. Make this list your
possible agents instead of defining it as a general task.
Or:
2. Make sure your logic for determining the agent
always returns an agent. If you are using a custom
SAP Business Workflow Interview Questions
- 26 -
rule, then at the end of the logic check to see if an
agent was determined and if not, identify a default
agent (like a WF admin or business analyst) that can
receive the item and investigate who to properly route
it to.
Note: If you go with option 1 and at runtime the logic
fails to determine an agent, then an error message is
sent to the WF admin instead of the task being sent to
everyone.
SAP Business Workflow Interview Questions
- 27 -
Question 19: Adding functions
Adding a function module - How and Where
How do I configure a pop-up box to appear to notify
the approver when a message is sent to his inbox?
A. Change the priority of the step to 'Highest' in the
'Other' tab.
Question 20: Inbox display-
Transaction
Our company is in the process of customizing enduser
screen using SAP GUIxt.
I have to call the workflow ‘inboxscreen’ only. I tried
to use SWBP and SO01 TRANSACTION. However, I
have to display the inbox message only. How can this
be done?
A. In your custom program set the parameters for
type and ID (sap transaction. SWI5) and call the same
transaction, using call transaction statement.
Use the Type US and assign ID as its user name.
SAP Business Workflow Interview Questions
- 28 -
Question 21: Transferring User
Outbox
We need to change the username of one of the users
on our system. Simultaneously, she would like to take
all of her work items, completed and uncompleted
onto this new account with her. We were able to
forward the uncompleted items from her inbox using
SWIA. However, we can't find a way to forward the
contents of the outbox. Is there a way to resolve this?
A. This is not usually done. However, you can try to
work around this. Create one abap report based on
transaction .SWI5 and SWI14. Use transparent tables
SWWWWIHEAD, SWWWLOGHIST and some more,
which will display all work item executed by that user.
SAP Business Workflow Interview Questions
- 29 -
Question 22: Approval Users
Capturing the name of the User who approves
the PO
Is it possible to capture the username who approves
or rejects my PO?
A. Yes you can. You can retrieve Actual agent name
after workitem execution. It’s name is
_WI_Actual_Agent. Move it via task parameter
binding.
SAP Business Workflow Interview Questions
- 30 -
Question 23: BUS2012 user exit
not triggering
We have an approval WF for PO(BUS2012). We have
the following scenario for a PO:
1. When a PO is created it must trigger an email to
respective person for approval of Release;
2. In SWEC i have set up for BUS2012 with
'CREATED' event and Oncreate option is checked;
3. In Task triggering event [standard event], we have
Event 'ReleaseStepCreated' is fired;
4. In Task under OBJECT METHOD we have method:
'SINGLERELEASE';
5. In the workflow Template we have
'RELEASESTEPCREATED' as an event;
In release strategy it indicates '9' in the workflow
column for Release Code.
We need to use the userexit M06E0005 to use our
Purchasing org requirement. However it’s not
triggerring.
Role is also defined but its not accepting the FM:
EXIT_SAPLEBNF_005 which is of userexit
M06Er0005.
SAP Business Workflow Interview Questions
- 31 -
Any suggestions what could be missing or need to do
anything with Role.
A. If you need to connect responsible users to
Purchasing group (or even Organizational unit) to
evaluate agents in WF, then you can use standard
roles (transaction PFAC) with responsibilities.
Responsibilities are quite flexible and time dependent.
SAP Business Workflow Interview Questions
- 32 -
Question 24: RSWUWFML
Report RSWUWFML and executable
attachments
I currently run report RSWUWFML on 4.6C. The
work item can be transferred and be seen in Outlook
inbox, however, the executable attachment cannot be
found. This also happens even for the simple
workflow "Approve notification of absence". Why do
these problems occur and how can it be resolved?
A. You can use report RSWUWFML2 instead. It's
available on 4.6C with basis support package 47 or
you can import support section using transport
attached to note 691774.
SAP Business Workflow Interview Questions
- 33 -
Question 25: Creating Events
Create an Event for New Object Type
I have created a new object type (ZNEW) based on
new table that I also recently finished (table ZID).
Creating Attributes for my new Object type was
simple and I have also managed with the methods.
What I would like to do now is to create event
'Created' and ‘Changed' to have the following
functions:
'Created' - whenever new record is added to table ZID;
'Changed' - whenever record is updated in table ZID;
Are these innovations possible? If so, how can these
be done?
A. If your table is being maintained by a custom
program, you can call 'SWE_EVENT_CREATE' from
the custom program to raise the events 'Created' and
Changed' after the record is saved.
If your table is being maintained by a standard DDIC
maintenance transaction (i.e. SM30), then you can
create a change document (SCDO) function and link
the events of your new business object to the change
document (SWEC).
SAP Business Workflow Interview Questions
- 34 -
Question 26: PO release workflow
I'm using the ‘ReleaseStep’ created event to trigger my
custom PO release workflow . However, this event is
triggered even if the release is canceled. How can I
configure the system such that my workflow would
automatically notify the user (by mail) that it has been
cancelled but it still needed to be completed?
A second problem I encountered was with the
configuration of the ReleaseStepCreate as the trigger
event. When I did this, the ReleaseStepCreate triggers
the next work item to the approver. This should not
happen automatically. How can I trigger workflow so
that PO is created or that only one level is released
when necessary? How can I stop the automatic
workflow trigger when the release is cancelled?
A. You can handle this before IMM after the WF is
triggered and then pass it to your inbox. From there,
apply some logic for cancelled release and set the
trigger accordingly.
Or:
In the basic data section, start event tab, and then
specify conditions.
SAP Business Workflow Interview Questions
- 35 -
Question 27: Use position as
agent
How do I pass the position to the container from the
business object? I hav e actually copied BUS2013 and
want to pass the position from the BOR to WF
container. What should be the type of the container?
Should the agent be an expression in the activity of
the WF?
A. You need to create parameters in BO event and
pass position to this. From the event container, you
can then map to the workflow container.
Under normal circumstances, you would create an
element in the WF and link it to the one in your
object. But this would mean that:
1. The element exists in your object as a parameter of
the event that will trigger the WF;
2. That before you fire off the event, you populate the
parameter of the event with the position;
SAP Business Workflow Interview Questions
- 36 -
Question 28: Workflow
Substitution
Is there an existing report sy stem or mechanics within
the SAP to determine who the approver has
substituted with?
To illustrate, an example would be:
PR release task, USER1 is the approver, but USER1
substituted to USER2 for approval.
Is there a report to determine to reflect that USER1
has substituted to USER2?
A. I am not aware of any standard report mechanism
availability in SAP. What you do is check with the
HRUS_D2. It is the table where you can find the
active substitutes for user.
SAP Business Workflow Interview Questions
- 37 -
Question 29: Deadline Agents
I am having problems using an expression to identify
recipients of a deadline notification. More specifically,
the problem occurs only when I utilize a Role as a
recipient.
The latest complication I encountered was having the
recipient as an expression, of which is also a container
element. If I fill that container element with a type
"user": like USZTESTID1, it works fine. But, if I fill the
container element with a type "role": like
AGZTESTROLE1, the recipient does not receive
anything.
The format of the expression is the first 2 characters
representing the "type" of the agent. The rest is the
agent itself.
‘US = User, AG = Role’
Is this possibly a bug with RSWWDHEX? If so, how
can this be resolved?
A. For Rule (AC) and Role (AG) expression cannot
be used.
An excerpt from the online documentation:
SAP Business Workflow Interview Questions
- 38 -
“You can specify not only a system user, but also a role
or an object of Organizational Management such as a
position, a Job, an organizational unit or a work
center. Alternatively, you can define a container
element that contains the object of Organizational
Management at runtime or a rule for dynamic agent
determination.”
Objects of Organizational Management are referred to
as “organizational unit, job, position, work center”.
Role and Rule are not considered objects of OM.
SAP Business Workflow Interview Questions
- 39 -
Question 30: SD, Triggering
I want to trigger my workflow whenever a billing
document gets cancelled. For that I wanted to use
"VBRK" business object. But "VBRK" doesn't have
event "CREATED". It only has an event called
"ASSIGNED". So how do I trigger my workflow? Also,
what is event "ASSIGNED"?
A. Create a subtype of VBRK and add a new event
'created'. Afterwards, generate and then add this as a
system wide delegate for VBRK. You can get this new
event to raise (VBRK.Created) through the ‘change
documents’ (SWEC).
Question 31: Display limitation
Is there a way to limit the display to inbox -workflow
tasks only?
A. The answer lies in table HRS1201. Check to see
if the field ‘Background’ does not contain an X. If it
doesn’t then it's a dialog task.
SAP Business Workflow Interview Questions
- 40 -
Question 32: Generating index
What is the purpose of button "Refresh index" in
screen "Standard task: Maintain Agent Assignment"
(in menu Additional data>Agent
assignment>Maintain)?
A. Generally, the agents for a task are stored in a
cluster (index). The refresh button just populates this
cluster. When you push that button, the code function
RH_TASK_AGENTS_INDEX is executed.
SAP Business Workflow Interview Questions
- 41 -
Question 33: Priority Problems
Solving Priority Problems in Workflow
We have 2 different types of workflows. One is for
Ordinary Orders and another is for Outage orders.
The Ordinary order workflows take 1 minute to
complete. Our system is designed so that every
morning at 12:00 a.m.,
the deadline monitor job triggers 500 of Ordinary
Order Workflows.
We have 15 work process allocated to generate
workflows.
It is currently taking 1 minute for each workflow to
finish. Hence, it is taking at least 35 minutes to
complete all of them. In the mean time, if an Outage
Order workflow comes, it has to wait in SM58 queue
for 35 minutes before it gets executed. Is there a way
to re-program the cycle so that a higher priority is
assigned to the Outage order workflows than the
Ordinary Order workflows?
A. You can try more connection. Find something in
transaction SMOS, parameter max connection.
SAP Business Workflow Interview Questions
- 42 -
Question 34: Warning Message
Display a warning message from a
background job
We currently have a PR release workflow that is
structured as follows:
Step 1. The User gets a workitem in the outlook;
Step 2. While executing the workitem, he sees a
Decision step;
Step 3. The User Approves the PR;
Step 4. The PR is released in the background (using
std BO2105).
We encounter cases wherein the user approves the PR
but the approval does not reach the subsequent level
because of an error in the process of releasing. Errors
are reflected in the return table.
What we need is for the user to get a warning or error
message whenever this happens. How can this be
done? Is there a way to pop a message for the user
while he is in the same dialog sequence? Generally,
Users do not want to go back to Outlook inbox to
check for confirmation or error mails as it slows down
the work process.
A. You can use TH_POPUP (via a background job)
in an old release R/3 (4.6c). For 4.7, you have to use
SAP Business Workflow Interview Questions
- 43 -
the CALL FUNCTION with the DESTINATION
parameter.
For example: if system called ‘SAPprd’
Use Code: CALL FUNCTION 'TH_POPUP'
DESTINATION 'sapprd_PRD_00'.
This will work in background mode.
SAP Business Workflow Interview Questions
- 44 -
Question 35: Debugging Business
Object
Is it possible to debug Business Object? Is it also
possible to get a trace of the Business Object Event
triggers and Method Calls?
A. In TR. SWO1, instantiate the business object.
From there you can easily debug methods. To debug a
BOR method you just need to put a breakpoint in your
method and test the same. You can also debug
attributes by placing the breakpoint and then
initiating the object. If what you mean by debugging a
method for a trigger event – is the method in a task
that is triggered by an event, then you will have to
debug all the way through the workflow engine from
the point where you raised the event (SWUE) until the
task calls the method. A breakpoint in one of the
binding FMs would be useful here.
To trace the events, switch on the event trace SWELS
and view SWEL.
SAP Business Workflow Interview Questions
- 45 -
Question 36: PO Release
Workflow
Workflow for Purchase order release Procedure
How do you start the configuration for the Purchase
order release Procedure?
A. You could start by taking a look at the Std. WF
provided by SAP: WS20000075. From there, you
would know how to proceed.
SAP Business Workflow Interview Questions
- 46 -
Question 37: HR Infotype
Workflow for HR info type
We have the following process for our HR salary loan
procedure:
1. The employee requests a loan.
2. The Finance department either approves or rejects.
3. If approved, Finance credits employee account.
4. Afterwards, Finance debits employee salary.
Based on this procedure, our HR consultant has
created a special infotype to manage the loan request.
The credit/debit is committed via financial invoice.
In addition, we wish to integrate these operations via
workflow. My problem is there is no standard
business object (!). Creating the HR infotype also
generates business object concerns. How do I work
around special issues concerning the creation of the
business object?
A. The standard Business Objects for infotypes is
BUS1065, EMPLOYEET, (PFBASIC). The Event
linkage can be done in SWEHR3. In here, you can link
workflows to different infotype operations via PA30.
SAP Business Workflow Interview Questions
- 47 -
Question 38: Workflow for
material creation
I have to setup workflow for material creation.
Whenever a new material is created by engineering, I
have to design a workflow so that every other
department can maintain the views. The requirement
is that there should be flow and notification by email
between departments for maintaining all the views of
material master. How do I proceed to do this?
A. You may follow these steps to start with:
1) Create change documents for tables of material in
material master - transaction SCDO;
2) Then, create your own business object, please note
the key field; it must coincide with key fields of tables
of material in material master - transaction SWO1;
3) Afterwards, create event "CHANGE" for your BO
from point 2 and for your change document from
point 1 - transaction SWU_EWCD;
4) Finally, create your WF start of triggering event
from point 3.
SAP Business Workflow Interview Questions
- 48 -
Question 39: Transport of
General Task
I've got a problem with the agent assignment. During
the development process, I'm either setting the task as
General task or I'm assigning it to an Org structure.
Previously, there hasn't been any problem. But for
some reason, when I'm transporting it now, there isn't
any agent assignment in any of the systems I'm
transferring it to.
I found one SAP-note (72715) on it, but it was from
2001, and for versions 3.0A-3.1G, promising that it
would be OK from 3.1H. Currently we're on version
4.7.
What I know is that since the last time I put up a WF
we have started implementing CRM and also starting
to use the HR functionality. I've checked, and none in
these projects have knowingly made any changes. Is
there any way to resolve this?
A. Go to transaction OOCR and clear the field Value
Abbr. for line TRSP CORR.
Then you can create a transport request for making a
task general.
SAP Business Workflow Interview Questions
- 49 -
Question 40: Workflow
Performance
In my scenario, a particular WF is going to be
triggered after data migration of approx. 100000
records. i.e. around those many instances will be
created.
My question is, should I anticipate a performance
issue? Shall we go for Event queue in this case?
If we go for event queue administration, we need
inputs on the following points:
1. Whether should we select linkage type as – Mark
linkage as having errors?
2. Inputs for parameters for Background job
scheduling:
In respect of – Number of events to be read
(considering case of 100000 records) and time
interval.
Another factor to consider is if we can mention event
delivery sequential and asyn. mode, for this case?
A. For your requirements, you can use transaction
SMQS and SWEQADM.
SAP Business Workflow Interview Questions
- 50 -
If there is more work item, then activation of event
queue is always advisable. Keep in mind how many
work processes you are assigning for event queue.
SAP Business Workflow Interview Questions
- 51 -
Question 41: PR Approval
Notification by email after PR has been
completely approved
I have workflow in use for PR release strategy. The
requirement is after all agents involved have approved
the PR, in other words PR is released for PO and
emails should be sent to those agents. I tried to use
the event 'Released' (BO BUS2105), but this event is
triggered every time PR Release code is approved.
How can I fix this?
A. You need to add one step which will be based on
release strategy. Necessarily, corresponding method
will be in your BUS2105 object type, I am guessing
ZBUS2105 or whatever you have already created. It
will check the key field of bus2105 that is PR, directly
go to table and check the release strategy codes. See if
you can use related transparent tables r t1 6FS and
t16fc.
This requires a bit of abap work but from here, you
can maintain the person(s) to whom you want to send
email.
SAP Business Workflow Interview Questions
- 52 -
Question 42: Purchasing
Workflows
Standard workflow in Purchase requisition
and Purchase order
What are the required settings to be done for
activating the standard workflow in purchase order
and purchase requisition?
I tried the setting up one for the organizational plan,
but it is not throwing the messages to the user in his
SAP inbox. What could be the conflict here and how
could this be resolved?
A. Do workflow configuration by just running the
transaction. Then, create organization in
workflow/HR area. From there copy std workflow
WS20000075 to a customized workflow. Make
changes as required. Set the triggering event. It
should work smoothly afterwards.
SAP Business Workflow Interview Questions
- 53 -
Question 43: Approval for new
cost center
I have a requirement for approving new cost centers
.When the user creates
cost center, I have to send approval for n level. Is
there any standard cost center approval workflow?
A. There is no SAP standard cost center approval
workflow. Workflow can only automate an existing
process or a process you are about to develop. One
option would be to design a process where you store
the data in a Z table, get the approvals and then create
the CC.
SAP Business Workflow Interview Questions
- 54 -
Question 44: Workflow for IDOC
Error
What are the configurations or steps needed for the
IDOC error notification workflows to work?
A. Go to the IDOC configuration. Set the "Business
object" and event to be used. From there, you can
define the agents who were receiving the message in
IDOC configuration. Then, search from the
corresponding standard task in PFTC. Lastly, activate
the event linkage in task.
SAP Business Workflow Interview Questions
- 55 -
Question 45: Release Strategies
SAP standard workflow for release strategies
I need to implement the SAP standard workflow for
release strategies for PR. I have done all the
customization required for release strategies,
maintained release codes as workflow relevant, and
assigned Agent ID to release codes. Now to use the
SAP standard workflow for release strategies is it
possible to just use workflow template 40000001
(WWW scenario: release of purchase requirement)?
What are the steps that I need to perform to use this
template for my workflow?
A. You just need to link the workflow template to
BUS2012. Afterwards, RELEASESTEPCREATED in
SWE2, and then test it.
As you are using standard template in
SWDD_CONFIG transaction, you can change the
workitem descriptions in accordance to the
requirements.
If there are any user decision steps to make, you need
to define agents.
You may also need to activate the event linkage. From
here, everything should work fine.
SAP Business Workflow Interview Questions
- 56 -
Question 46: Error Status
Possibility to complete a workflow with an
'ERROR' status
The workflow I'm supporting has a wait event that is
supposed to be completed if a new workflow is started
for the same FIPP document. The problem is that if
the original workflow errors and then a new workflow
is triggered for the same document, then the original
workflow is not completed. It stays in 'ERROR' status.
Meanwhile, the graphical workflow log shows that the
wait step has been triggered.
Is it possible that a workflow in error could still be
completed or is it only possible for a workflow that is
in 'In-Process' state?
A. You can try to enter the work item in change
mode. Press 'Restart after error' and then 'Complete
manually'.
Or another option would be logically deleting the
work item.
Do this by going to display task-->menu option-->
technical work item displayàedit--> change. From
hereon, you will find the buttonà delete logically.
Your work flow will then be completed.
SAP Business Workflow Interview Questions
- 57 -
As another workflow is in process for the same
document, you can delete workitem logically. That
will not affect the new workflow that is in process.
If the workflow is going to reflect ‘error’ every time a
new WF starts for the same document, you may need
to handle error in workflow.
SAP Business Workflow Interview Questions
- 58 -
Question 47: List all Workflows
What is the transaction code for listing all the
workflows in the system (including standard &
customized workflows)?
A. Use se16 and table name 'HRSOOBJECT'. It will
list all the workflows. It also lists Roles but you can
restrict by selecting TS, TG and WS.
Or another option is to use the transaction
SWE2/SWETYPV, and check the active type linkage.
SAP Business Workflow Interview Questions
- 59 -
Question 48: SWUS transaction
workflow
What are the relevant details of SWUS transaction
workflow? What is the difference between the
‘Execute’ and ‘Execute with debugging on mode’? Why
is it that if a task works fine using the ‘Execute with
debugging mode’, it doesn’t work at all if I use the
‘Execute’ mode only?
A. The SWUS SAP transaction is utilized to test the
workflow. If you have created the workflow template
in wbuilder, then you can test it as well. Pass the data
in ‘input’ push button. If you want to check that
whether any workflow has started or not, you can
check with the log.
If your workflow template is not working as expected,
you can diagnose it using transaction SWUD. Supply
the WS and 8 digit name of your task appropriately.
SAP Business Workflow Interview Questions
- 60 -
Question 49: Terminating Events
Problems defining a terminating event
I have a requirement that if the PR is changed during
the PR release then the workflow does not need to
start. The problem is my workflow is triggering on the
event 'RELEASESTEPCREATED' for Bus2105. This
event is also triggered with
'CHANGEDSIGNIFICANTLY' event, when someone
changes the value of the PR. The workflow is triggered
as well. I tried to configure the start-condition as well
as define a wait-event step. However, both do not
work and the workflow continues to trigger.
How can this be resolved to fulfill the requirement?
A. In type linkage you can attach your own Check
Function module. In check function module you can
define your own conditions when to pass this event to
the receiver (in your WF template). Try to put the
conditions in Check function module.
You can also possibly redefine your release strategy
with the help of MM guy, in PR classifications. The
price is also a criterion to determine the release
strategy. T his is dependent on how you would you like
to go. Check fn. Module. It is one of the best
solutions.
SAP Business Workflow Interview Questions
- 61 -
Question 50: Send email when
invoice is posted
How could I create a simple workflow to let the
system post an invoice for a specific customer? Is it
possible to send an email only in that situation:
Customer (10025)?
A. You have two ways to send mail. One is to use
user-exit or BAdI to send mail using transaction
commit. Two is to check a customer data in WF. Look
for BUS2081-->event: assignedà createdà postedà
blockedPriceà blockedQuantà releasedà
cancelledà parkedà completedà approvedà
àdeletedàcompletedChangedàcompletedToRelease
.
To ensure that it only fires for a specific customer,
your best bet is to use start conditions looking for
LIFNR = 10025.
SAP Business Workflow Interview Questions
- 62 -
Question 51: WF queries
Why is it that my workflow is intermittently sending
two emails for verification on the leave application
WF?
A. The function of receiving mails is dependent on
your WF definition. Re-check the WF definition.
SAP Business Workflow Interview Questions
- 63 -
Question 52: SWDD configuration
What is the difference between SWDD and SWDD
configuration?
A. SWDD_CONFIG is used to make changes to SAP
WF templates. This transaction allows you to make
changes like workitem texts, agents and step names.
On the other hand, SWDD is used to create your own
WF templates.
SAP Business Workflow Interview Questions
- 64 -
Question 53: Triggering Events
ReleaseStepCreated did not trigger
BUS2013/BUS2014
We have approval WF for
PO(BUS2012),SA(BUS2013) and
Contracts(BUS2013). We also have the following
scenario for a PO:
1. When a PO is changed (Value/new line item) and its
approval is still in process a ‘Blocked state’ event
‘CHANGED’ is fired;
2. When a PO is changed when it is in a Release state,
event 'ReleaseStepCreated' is fired along with
'CHANGED';
This is not materializing for SA and Contracts. I
checked the release strategy for them and found all of
them had '9' in the workflow column for Release
Code.
Any suggestions what could be missing?
More recently, I had to change the workflows for
PO/SA/Contracts.
Changes made were as follows:
1. WF templates;
2. Created a custom task with logic;
SAP Business Workflow Interview Questions
- 65 -
3. Created FM;
4. Created a custom object for the method in 2;
During testing, the following were observed:
1. When we change an SA/Contract, ME32L and
ME33K do not reset the release back in blocked
status. This is why event ReleaseStepCreated is not
triggered. I checked with the functional team and they
said nothing changed in release strategy.
2. I checked in our quality s ystem and found
that ME32L and ME33K work fine during changes.
3. Assuming that my development is independent of
these transactions, transport was moved to Quality
system.
4. Unfortunately , ME32L and ME33K started
behaving in same manner as in development box.
Confusion was caused by the facts that:
1. There was no move in the customization;
2. There was no change and movement in the
BUS2013 and BUS2014;
3. Even the standard transactions were not moved
(assuming some change due to application of SAP
patches);
My question is, what could we have missed during
configuration and troubleshooting? Why is the
ReleaseStepCreated not triggering
BUS2013/BUS2014?
SAP Business Workflow Interview Questions
- 66 -
A. The release strategy with '9' in Workflow points to
User Execute EXIT_SAPLEBNF_005.
You can check two things to determine what is wrong.
Do the following:
1. Check design of EXIT_SAPLEBNF_005, it is not
able to return any WF Agents.
2. Check SM58 to get an error listing of RFC workflow
error calls.
From hereon, you will know for sure where the
conflict started.
SAP Business Workflow Interview Questions
- 67 -
Question 54: Triggering events
Triggering BUS2105.significantlychanged
Which changes in a purchase requisition would be
considered applicable to Workflow?
A. These would be the changes that lead to a new
Release group or Release strategy.
SAP Business Workflow Interview Questions
- 68 -
Question 55: Pop-ups for
workflow
Is it possible to configure the SAP workflow to have a
pop-up message sent to the approver in the instance
that Purchase Requisitions are ready for them to act
on?
A. You can either send an Express Email message, or
if it is a workitem, then make the Priority = 9. It will
send an express message to the Respective Agent.
SAP Business Workflow Interview Questions
- 69 -
Question 56: Replace the user in
workflow
I have a requirement to have User A be replaced with
User B in a workflow. No other details were given for
the required task except that user A is no longer with
the organization. How can I configure this into the
existing set-up?
A. Go to that particular IDOC configuration (t-code
WE20) and find the agents attached there. If the agent
is determined through user id you can change the user
id to B. If it is maintained using work center you need
to update the work center in accordance to your
requirements.
SAP Business Workflow Interview Questions
- 70 -
Question 57: Resubmitted WI
Resubmitted WI doesn't get triggered
I discovered that there are some work items that were
put for re-submission until Oct 1st 2005 that haven’t
been returned to the inbox yet. The log indicates
status 'waiting'. I checked SWU3 and everything
seems to be working fine. I also checked all of our
batch jobs in the system that is supposed to take care
of these programs:
RSWWDHEX
RSWWCLEAR
RSWWCOND
RSWWDHEX
RSWWERRE
Everything seems to be running smoothly.
I can't find anything wrong in the documentation.
Where is the bottleneck coming from? Why is the resubmitted
work not coming in the inbox
automatically?
A. First, I would recommend you to search through
previous operational notes if this had happened
before. Second, write an OSS and let SAP sort it out.
If it’s nothing else in operations then it's their
functionality that's not working.
SAP Business Workflow Interview Questions
- 71 -
Question 58: Workflow without
HR
Workflow implementation without HR
Our client is planning to implement a few FI and MM
workflow as part of the Release 1 implementation.
They will not have HR in SAP at that time (HR will be
in Release 2 implementation).
Can you please let me know how we can implement
Workflow - Agent Assignment, User Identification etc.
without HR? If we need to do approval then will we
need approval hierarchy?
A. Part of HR necessary for WF may be used without
implementation HR.
In transaction PPOM, you may assign Agents with
assigned Users as is necessary in support of WF. You
still can define an Org Hierarchy without HR, define
organization structure, jobs, positions, and every
other needed object.
Your second option is to define roles and use those
roles in the agent assignment. Roles can be based on
the custom function module also.
A third option will be to build a custom table to hold
the agent information. Then create custom FMs tied
to a RULE which would query the table and, based on
SAP Business Workflow Interview Questions
- 72 -
the information in the workflow containers,
determine which agent(s) to route the work item to.
If you go this route, consider creating a custom
transaction and give the users a custom screen (and
not sm30) to maintain the table. Our screen looked
like a hierarchy so they used the drop-down to select
the agents. Using this, they could visually see to whom
and in what order the work items would be routed.
SAP Business Workflow Interview Questions
- 73 -
Question 59: Business workplace
Inbox clean up
I'd just like to know if there's a way for the basis
admin to delete unwanted/old mails in the business
workplace. Is there an abap program which I can
schedule once a month?
A. Transaction SWWL (program RSWWWIDE) will
delete workitems periodically but you need to be
extremely careful running it in a productive
environment. This is because you may end up
unnecessarily deleting items that you did not want to.
You should also run SWWH (program RSWWHIDE)
to delete the workitem history for those workitems.
This is an extreme operation though.
I would strongly recommend using an archive instead.
Archive out your completed workitems via SARA,
object WORKITEM. This way, you can retrieve files
whenever necessary.
SAP Business Workflow Interview Questions
- 74 -
Question 60: Items to WF-BATCH
Released items go to WF-BATCH inbox instead
of WF_Initiator
I created a new workflow and inserted standard
workflow WS20000077 inside (so I can add
additional custom steps later). It worked fine until
Purchase Requirement was released. The next step
should have been to send notification to
WF_Initiator. However, instead of going to the
initiator/agent, items go to WF-Batch's inbox (with
status of READY).
The interesting thing is that if I deactivate my
workflow and activate WS20000077 all by itself it
works fine (user who initiated workflow gets a
message stating requirement was released). I have the
exact same steps and tasks in my workflow, and the
same settings. Why is it then that the items go to WFBatch
and not the initiator/agent?
A. This appears to be a binding issue. Check and
make sure that you bind the initiator from your
custom workflow to your sub-workflow.
You may also need to go to the activity step where
you've defined the subworkflow, then check the
workflow to task bindings. There should be a blank
entry for the workflow initiator, which you can just
bind to the actual agent in your workflow container.
SAP Business Workflow Interview Questions
- 75 -
If you can't see this entry (and I think this is why you
couldn't find it), just expand the list of possible
bindings with the green down arrow button.
SAP Business Workflow Interview Questions
- 76 -
Question 61: Setting Dialogue
tasks
How can I set the foreground/dialogue tasks to
"general tasks"?
A. Go to Task--> additional data-->agents--
>maintain agents screenàclick on properties. In
there, you will get a pop-up, then select "general
task".
Question 62: Workflow problem
I use the User decision activity as one of the step of
workflow. This works properly but after the step in
workflow, I use condition activity. This would reflect
the condition as always false. But if I check the value
in the container, the value is true. What could be the
problem in the workflow?
A. This is either a binding or buffering problem.
Check the definition of your container elements
correctly and proceed from there.
SAP Business Workflow Interview Questions
- 77 -
Question 63: Spool Failure
Sending a message to user inbox on spool failure
When we create a Purchase order and print the same
or send it via mail, a spool is created. In case the spool
fails, a message should be sent to the user who created
the spool. How can this be configured?
A. The first thing to do is to check whether it's
possible to trigger a workflow based on a spool failure.
To do this, check the event log after a spool failure
occurs (SWEL - make sure it's switched on!) to see
whether anything is raised for your test case.
If you do have an event, you're pretty much there -
you can just create a very simple one-step workflow
based around a notification mail (something using
SELFITEM or STD_TEXT should do it).
If this does not work, there is another approach that
could be taken. Do the following steps:
1) Check OSS notes to see whether there's any
configuration you need to do to get your event to rise -
you might even put in a query yourself. Often that's
the only way to get a true answer to this sort of
problem;
If you draw a blank, then try the following:
SAP Business Workflow Interview Questions
- 78 -
2) See whether there's a user exit that gets called if the
spool fails - if so, you could raise your event
programmatically using 'SWE_EVENT_CREATE'.
3) If that fails, you could look at writing an ABAP
report to raise your event based on it detecting that a
spool has failed (perhaps through querying new
entries in the underlying SAP table), then set that
ABAP to run as a scheduled job.
SAP Business Workflow Interview Questions
- 79 -
Question 64: Substitution
Questions
1) We would like to trace which user had maintained
its workflow substitution in SBWP -> settings ->
workflow settings -> maintain/activate substitute. We
had already activated the audit log SM19/SM20,
however the audit trail only reflected the respective
user had logon to SBWP etc. It did not log further
detail what he had done in SBWP. Is there any other
table or tools that we can utilize to see those detailed
info?
2) Are there any transactions/reports/tables we can
list at present which users had set/activated his
workflow substitution in SBWP?
3) If we remove the authorization for the workflow
substitution in SBWP, what authorization object can
be modified?
4) Is there any central transaction that we can use to
maintain ALL user workflow substitution that they
can maintain themselves so we can use SO36 to
centrally maintain the auto-forwarding for all user
IDs?
5) How do you determine active and passive
substitutes?
SAP Business Workflow Interview Questions
- 80 -
A. First, take a look at table HRUS_D2. From there,
you can create a maintenance view for this to allow
mass maintenance of substitutes.
Secondly, there is an FM to maintain users’
substitutions:
‘SWL_SUBSTITUTION_DEFINE’
Here's a little ABAP I've found on the net to call the
FM:
*--------------------------------------------------------------
-------*
* Program: Z_DEFINE_SUBSTITUTE *
* Author: Erik Gouw, Avelon *
*--------------------------------------------------------------
-------*
SELECTION-SCREEN BEGIN OF BLOCK selection
WITH FRAME.
PARAMETERS: p_user type uname matchcode object
USER_ADDR.
SELECTION-SCREEN END OF BLOCK selection.
CALL FUNCTION 'SWL_SUBSTITUTION_DEFINE'
EXPORTING
User = p_user.
Lastly, look at table HRUS_D2. The 'ACTIVE' field
will tell you whether the substitution is active or
passive.
SAP Business Workflow Interview Questions
- 81 -
Question 65: Condition Step
Defining Condition Step in a Workflow
How do you define a condition step? In an
expression, I am checking the WF container element
value. For TRUE value, I want to continue to the next
step, and for FALSE I want to exit workflow, as this
"next step" is the last step in a WF. However, when I
come back to WF Builder, I can see that both results
bring me to the "next step". What I am missing here to
correctly configure the TRUE and FALSE values?
A. You need to add a process control step to
complete the workflow in false branch.
SAP Business Workflow Interview Questions
- 82 -
Question 66: Virtual Attribute
I have a virtual attribute 'UserName' in my own
business object. During the test, BO works fine. But
when I used this virtual attribute in the task
WF and used transaction SWUS, that value from
virtual attribute was null.
In the code of my BO I read:
GET_PROPERTY UserName CHANGING
CONTAINER.
Data: wa_adrp type adrp.
Select single f~NAME_TEXT
Into corresponding fields of wa_adrp
From adrp as f inner join usr21 as p
On f~PERSNUMBER = p~PERSNUMBER
Where p~BNAME = kod.
OBJECT-UserName = wa_adrp-NAME_TEXT.
SWC_SET_ELEMENT CONTAINER 'UserName'
OBJECT-UserName.
END_PROPERTY.
Status of virtual attribute is 'implemented' and BO is
fully generated.
What can be the problem here? How can this be
resolved?
SAP Business Workflow Interview Questions
- 83 -
A. If the status of the business object is
"Implemented", then this is not consistent. Please
change the status to "Released" and try again.
SAP Business Workflow Interview Questions
- 84 -
Question 67: Role container value
Please help me out, how do I take Role Container
Actor Tab values into work flow container element?
A. You should check the binding. Normal binding of
container element from WF to task should accomplish
this.
In terms of a task to workflow binding, you'd typically
only want to pass back actual agent back into your
workflow. There's no real linkage between a role
container and the workflow container, unless you've
created an extra step in your workflow/a virtual
attribute to evaluate a role and pass the results to a
workflow container element so you can set your agent
assignment for a subsequent workflow step via an
expression.
SAP Business Workflow Interview Questions
- 85 -
Question 68: Audit Trace
We are testing FI Document Parking Workflow Object
FIPP in 4.7.
When the document is posted by the last approver, we
can see that the document is posted or entered by:
WF-BATCH.
Is it possible to get the last approver's name in the
Parked by field? Or else,
how can we show the audit trace or log of the
document was approved by the right person?
A. One trick is to change the properties of whichever
method you're using to post the document so that it's
synchronous/dialog. Then check the 'advance with
dialog' box on the task configuration screen to form a
processing chain.
This means that whenever your user makes the final
approval, the posting action will kick in straight away
and the document will be posted under his/her ID.
Rather than changing the standard SAP business
object, it's always best to create your own subtype,
than to delegate that system-wide to the super type
via SWO6.
SAP Business Workflow Interview Questions
- 86 -
Question 69: Starting Workflow
Raise ABAP Class event to start workflow
I am working on R/3 version 4.7 (Basis 6.4). In here, I
have noticed that you can specify event linkages -
either a BO event or a CL event.
I created my class with a static event. The class
inherits from IF_WORKLFLOW, so that it can be
used in workflows. In the workflow, I have specified to
use CL events, and I have specified my class and
event. I have then set up all binding and everything
activates fine.
From there, I created a static method in my class to
raise the event. I have a small ABAP which calls the
static method, which in turn, raises the static event.
From my understanding, the workflow should then be
triggered, because my event was raised.
The event linkage is active but that doesn't work. So I
went to test it in transaction SWU0. I specified my
object category as ABAP Class, object type is my "Z"
class, which I can select from the F4 help, and same
with the event.
I execute, and it tells me that everything is working
fine. All the tasks that should be started are shown,
and no errors or warnings exist. My question is, why
doesn’t it trigger the event correctly? How can I
correct this situation?
SAP Business Workflow Interview Questions
- 87 -
A. The issue has more to do between the linkage
between the event and your workflow. Check out that
SWE2 has been set-up correctly, and see if you can
clearly see a mapping between your event and your
workflow, and that it should be enabled.
You can also check the event queue if it is enabled
(check SWEQADM). While doing that, check to see
whether the event is being delivered there instead...
If the problem still persists after the above solutions,
try raising the event via SWUE. If this still doesn’t
work, the next step would actually be to debug the
standard SAP code when you raise your event to see
where it's going wrong. From there, a more detailed
configuration solution can be mapped out.
SAP Business Workflow Interview Questions
- 88 -
Question 70: Material Change
Workflow
How can I configure workflow to track record for
every change of material in material master?
A. Do the following steps:
1) Create change documents for tables of material in
material master - transaction SCDO.
2) Create your own business object, please note key
field - it must coincide
With key fields of tables of material in material
master, transaction SWO1.
3) Create event "CHANGE" for your BO from point 2
and for your change document from point 1 -
transaction SWU_EWCD.
4) Create your WF start of triggering event from point
3.
SAP Business Workflow Interview Questions
- 89 -
Question 71: Resend Workflow
Resend workflow to another agent
Workflow was sent to an agent but the agent is out of
office. I need to send the workflow to another agent
but I do not know how. Do I have to retrigger the
workflow? If not, what are my options for reconfiguration?
A. You may use transaction SWIA to execute WF
without agent check. If this task has agents "Role", it
is possible to use transaction ppom for assigning the
Role Users. After which you can now use transaction
ppwfbuf.
SAP Business Workflow Interview Questions
- 90 -
Question 72: Email Notification
We have a problem in sending formatted mail. We are
currently using
‘SO_NEW_DOCUMENT_ATT_SEND_API1’ function
module to pass the email content. This function
module formats everything in plain text. However, our
requirement is to send mail with some part of the text
in a specific font and color with underlines. How do I
reformat the function module with these
requirements?
A. Check out report RSWUWFMLEC. This is used to
send emails in text or HTML format.
It also uses
SO_NEW_DOCUMENT_ATT_SEND_API1, but this
function is becoming obsolete. For example, it
truncates the mail subject beyond the 50th character.
There is an OSS note which solves this by replacing
the call to this function module with an objectoriented
approach.
Another approach that you might want to try is to find
in your workflow ‘created Tasks’àWorkflow
BuilderàSend mail SelectàTAB Requested END.
Then, check the "Text to be Requestedӈ Go inside
and you can write any mail text format there.
SAP Business Workflow Interview Questions
- 91 -
Question 73: Error Handing
I need to create an error handling workflow to call a
screen transaction. To do this, I need to create a
Business Object with a method that calls this
transaction.
My question is, how do I pass the data into the
transaction so that it is processed? Normally this is
done with the ‘CALL TRANSACTION’ command and
pass the data via a BDC table. I have analyzed the
IDOC_INPUT_ORDERS function module extensively,
and have seen that a BDC table is created from the
data in the IDOC.
The workflow task will have data mapped from the
IDOC into the container for the task. Do I also need to
explicitly map the data in the container of the
workflow item to a BDC session before processing?
A. The trick I here is to pass the values to your
custom transaction via the ABAP/4 memory.
In your method code, use the ‘export to memory’ ID
ABAP commands to store the variables. Then call your
transaction.
SAP Business Workflow Interview Questions
- 92 -
In your ‘Process Before Output’ script, just add an
extra form which imports the variables and put them
in the right place. Remember to clear them once
they've been retrieved.
Of course, that's for custom transactions. If it's a
standard SAP screen, then your options are:
1) Find a BAPI or function module that you can call
from your method instead -
'BAPI_SALESORDER_CREATE’ if it's a sales order;
2) Create a BDC table and do call transaction as you've
already suggested.
SAP Business Workflow Interview Questions
- 93 -
Question 74: Distribution Lists
Assigning SAP Office Distribution List in
Workflow Task
How do I assign a distribution list instead of an orgobject
in workflow task?
We have a group of engineers and managers who do
not have SAP log-on since the group monitoring
output of this workflow is dynamic and are not part of
the formal organizational structure.
Does it mean that creating a dummy organizational
structure will also entail updating positions and
transporting it every time?
A. You can use the rule ac30000012 and hard code
the SAP distribution list. Make sure it is a shared type
format.
SAP Business Workflow Interview Questions
- 94 -
Question 75: Work item execution
Work item not getting executed
I encountered a problem while trying to execute a
work item in the receiver’s inbox. I'm putting the
notification through ESS by generating web
transactions. The notification is going to the inbox.
However, it is showing an error while executing the
item:
"Work item 000000021121: Object method
SWW_WW_EXECUTE_S cannot be executed".
How can this be resolved?
A. Check your authorization to the transaction that
is being executed.
SAP Business Workflow Interview Questions
- 95 -
Question 76: Work Item and
Notification
What differences are there between a work
item and a notification mail?
A. The work item cannot be used to notify several
users. Mails can be routed to several users, just like
work items. When a mail is sent, and one recipient
reads and deletes the mail, all other recipients will
still have access to their own copy in their own inbox.
However, when a work item is processed by one of the
recipients it will automatically disappear from all the
other inboxes. So you can see that a work item is
unsuitable for notifying several users. It is also worth
noting that a mail can be forwarded in many different
ways (fax, internet...) whereas the work item cannot.
b) The work item holds up the workflow
When the workflow sends a mail (usually as a
background step) it continues with the process
immediately after transmitting the mail. When a work
item is generated, the workflow will not continue until
the work item has been processed. This slows down
the process. Occasionally this is what is intended
(using the work item as an approval step without the
ability to reject) but
usually you will better off using mails for notifications.
SAP Business Workflow Interview Questions
- 96 -
Note: You can send business objects as references
with the mail either as a business object reference
attached to the mail or as an URL (ABAP required).
SAP Business Workflow Interview Questions
- 97 -
Question 77: Email Recipients
What is the difference between sending a mail
to a recipient list compared to sending
individual mails via a dynamic loop?
A. Performance. Sending 1 mail to 20 recipients will
cost considerably less performance than sending 20
individual mails. If the mail is sent as a SAP Office
mail (as opposed to e-mail, fax...) disk space will also
be a factor because the SAP office mail will only exist
once in the database, with references being created for
each of the recipients.
The only time you need to cons ider individual mails
with a dynamic loop is when the text of the mail varies
from one recipient to another.
SAP Business Workflow Interview Questions
- 98 -
Question 78: Sending Text
How do I send a standard text as an e-mail
from workflow?
It is very easy sending standard text , which may
include data from the workflow. You simply create a
background step which sends the work item
description. This may include variables which will be
substituted when mail is sent.
In early releases you have to create your own task
based on the method SELFITEM
SendTaskDescription. In later releases a wizard is
available for creating the step and in release 4.6 there
is even a step type which does this all for you
automatically.
Whichever path you take, there is very good online
documentation describing exactly what has to be
done.
SAP Business Workflow Interview Questions
- 99 -
Question 79: Complex Text
How do I send a complex text from the
workflow?
A. You may create mails using SAPscript. These mails
can include conditions which are evaluated in order to
determine which text blocks which are used in the
mail. Workflow variables can be used in these
conditions and workflow variables can be substituted
into the body of the e-mail text.
SAP Business Workflow Interview Questions
- 100 -
Question 80: Really Complex
Email
How do I send really complex mails from the
workflow?
If you this is not enough for you will probably want to
write your own ABAP routines for generating the text
and generating the attachments to go with the text.
Use the function group SO01 which contains functions
of the form SO_*_API1 which are ideal for creating
your own sophisticated messages. There are plenty of
advantages of how these are used within the SAP
system.
SAP Business Workflow Interview Questions
- 101 -
Question 81: How do I send
reports?
A. There are wizards (Release 3.1) which will create
workflows for you to send reports to a distribution
list. You can specify whether the results should be
transmitted or evaluated at the time the recipient
wishes to view the report. It is usually better to send
the evaluation because this allows the recipient to see
the results instantaneously, without having to wait for
the
report to execute first.
SAP Business Workflow Interview Questions
- 102 -
Question 82: Different Emails
How can I configure the workflow so that
different types of messages are sent out to
different people depending on how late the
processing is?
A. Follow these steps:
1. Specify a deadline period for the step.
2. Specify a name for the event. This adds new branch
from the step. More...
3. Add a new step to the branch which sends a mail
message.
4. Add another step to the branch which sends out the
second deadline warning (see mail steps above). Use
deadlines in this step to configure an earliest start so
that the second message is not sent until a further
time has elapsed.
5. Repeat step 5 as often as you like.
SAP Business Workflow Interview Questions
- 103 -
Question 83: Deadline Step
Missed
How can I configure the workflow so that when the
deadline is missed the workflow step is simply
skipped?
A. This is tricky to explain but easy to implement
once you know how.
Follow these steps (in later releases there is a wizard
which takes you through the steps):
1. In the terminating events view of the workflow step
activate the "obsolete" event and give it a name.
More...
2. Specify a deadline period for the step.
3. Specify a name for the event. This adds new branch
from the step. More...
4. Add a new step to the deadline path. This step must
be of type "process control".
5. Select the control "Make step obsolete" and use the
search help to specify the workflow step that has the
deadline. Only steps with obsolete paths defined will
be displayed (see step 1).
SAP Business Workflow Interview Questions
- 104 -
Question 84: Workflow triggers
Email
How do I trigger a workflow with an e-mail?
A. You can customize the system to call a BOR
method when an external mail (fax, e-mail...) arrives
in the system. You BOR method should either trigger
the e-meil directly or trigger an event. To customize
this user exit use the transaction SCOT.
SAP Business Workflow Interview Questions
- 105 -
Question 85: Accessing Tasks
How can I make sure that user's access their
tasks via the workflow and not via the menu or
launch pad?
A. The routing mechanism for work items uses roles
and organizational assignments to determine who
receives which work item. However the routing does
not provide extra authorization checks based on the
routing configuration. If you want to ensure that the
tasks are executed within the workflow, and not via
the standard transaction, service or MiniApp, then
you will have to apply your own protection.
The simplest way of doing this is to remove the
standard transaction from the user's menu or
Workplace role (but include it in the supervisor's role,
just in case).
If you want to allow the user to execute the task from
the menu if and only if they have received the work
item then you should replace the standard transaction
with your own custom built transaction. Your own
transaction simply calls the standard transaction but
performs it's own authorization check first, based on
the routing mechanism used in the workflow.
Tip: Add a second (ored) authorization check to make
sure that a supervisor can execute the transaction in
an emergency.
SAP Business Workflow Interview Questions
- 106 -
Question 86: Deadline Step
How do you create a new branch for a
deadline step?
A. By specifying the event name for a missed deadline
(of whatever type) you are indirectly telling the
workflow system that you want to add flow logic to
your workflow to meet this event.
Don't be put off by he fact that the branch does not
lead anywhere. This is because the branch is not an
alternative to the other results of the step. It is
followed in addition to the other paths. In other words
the workflow processing specified for a missed
deadline is followed without affecting the standard
flow. The step with the missed deadline remains
where it is and can still
be processed as normal
SAP Business Workflow Interview Questions
- 107 -
Part II: Table & Transaction
Code Reference
SAP Business Workflow Interview Questions
- 108 -
Important OSS Notes
322526 Debugging workflows
217229
Accessing the Consultants forum for
SAP Business Workflow/WebFlow
152871 Release Upgrade considerations for
workflow
134322 New Workflow Academy - Course
TAWF10
131795 Automatic e-mail notifications
125400 Modifying a productive Workflow
72923 Workflow interfaces
72923 Business Workflow Performance
SAP Business Workflow Interview Questions
- 109 -
Transaction Code Reference
AWUV Wizard for event creation Definition
tools -> Event creation -> Set up with wizard
· MCA1 Workflow Information System
Reporting -> Workflow Information System
(WIS)
· OOAW Evaluation paths
· PFAC Maintain standard roles
· PFAC_CHG Change roles Definition tools
-> Standard roles -> Change
· PFAC_DEL Delete roles Definition tools -
> Standard roles -> Delete
· PFAC_DIS Display roles Definition tools -
> Standard roles -> Display
· PFAC_INS Create roles Definition tools ->
Standard roles -> Create
· PFOM Maintain assignment to SAP
organizational objects Definition tools -> SAP
org. objects -> Create assignments
· PFOS Display assignment to SAP
organizational objects Definition tools -> SAP
org. objects -> Display assignments
· PFSO Organizational environment of a user
· PFT Maintain customer task
· PFTC General task maintenance
· PFTC_CHG Change tasks Definition tools
-> Task/Task groups -> Change
· PFTC_COP Copy tasks Definition tools ->
Task/Task groups -> Copy
SAP Business Workflow Interview Questions
- 110 -
· PFTC_DEL Delete tasks Definition tools -
> Task/Task groups -> Delete
· PFTC_DIS Display tasks Definition tools -
> Task/Task groups -> Display
· PFTC_INS Create tasks Definition tools ->
Task/Task groups -> Create
· PFTR Standard task for transaction
· PFTS Standard task
· PFWF Maintain workflow task (customer)
· PFWS Maintain workflow template
· PPOC Create organizational plan
Definition tools -> Organizational plan ->
Create
· PPOM Maintain organizational plan
Definition tools -> Organizational plan ->
Change
· PPOS Display organizational plan
Definition tools -> Organizational plan ->
Display
· SWDA Ongoing Settings Administration -
> Settings
· SWDC Workflow editor administration data
· SWDM Business Workflow Explorer
Definition tools -> Business Workflow
Explorer
· SWE2 Display and maintain event type
linkage Utilities -> Events -> Type linkages
· SWE3 Display instance linkages Utilities -
> Events -> Instance linkages
· SWE4 Switch event log on/off Utilities ->
Events -> Event/log -> On/Off
SAP Business Workflow Interview Questions
- 111 -
· SWEC Link change documents to events
Definition tools -> Event creation -> Change
documents -> Linkage
· SWED Assignment of change document
objects to object types Definition tools ->
Event creation -> Change documents ->
Define workflow properties
· SWEL Display event log Utilities -> Events
-> Event log -> Display
· SWF3 Workflow Wizard Explorer
Definition tools -> Wizards -> Workflow
Wizard Explorer
· SWF4 Workflow Wizard Repository
Definition tools -> Wizards -> Workflow
Wizard Repository
· SWI1 Selection report for workflows
Utilities -> Work item selection
· SWI2 Work item analysis Reporting ->
Work item analysis
· SWI3 Workflow outbox Runtime tools ->
Workflow outbox
· SWI4 Task analysis Reporting -> Task
analysis
· SWI5 Workload analysis Reporting ->
Workload analysis
· SWI6 Object links Runtime tools -> Object
links
· SWI7 Workflow resubmission folder From
Integrated Inbox or Workflow Outbox
· SWI8 Error overview Part of
administration of workflow runtime system
(transaction SWUF)
SAP Business Workflow Interview Questions
- 112 -
· SWL1 Settings for dynamic columns
Customizing, part of ongoing settings
· SWLC Check tasks for agents Utilities ->
Consistency check -> Organizational
assignment
· SWLD Workbench for Workflow 4.0
· SWLP Copy plan version
· SWLV Maintain work item views
Customizing, part of ongoing settingS
· SWLW Workbench for Workflow 3.0
· SW01 Business Object Builder Definition
tools -> Business Object Builder
· SW06 Customizing object types From
Business Object Builder, choose Settings ->
Delegate -> System-wide
· SWU0 Event simulation Utilities -> Events
-> Simulate event
· SWU2 RFC monitor Utilities -> Workflow
RFC monitor
· SWU3 Customizing consistency check
Utilities -> Customizing
· SWU4 Consistency check for standard
tasks Utilities -> Consistency check -> Task -
> Standard task
· SWU5 Consistency check for customer
tasks Utilities -> Consistency check -> Task -
> Customer task
· SWU6 Consistency check for workflow
tasks Utilities -> Consistency check -> Task -
> Workflow task
SAP Business Workflow Interview Questions
- 113 -
· SWU7 Consistency check for workflow
templates Utilities -> Consistency check ->
Task -> Workflow template
· SWU8 Switch technical trace on/off
Utilities -> Technical trace -> On/off
· SWU9 Display technical trace Utilities ->
Technical trace -> Display
· SWUD Diagnostic tools Utilities ->
Diagnosis
· SWUE Trigger event Utilities -> Events ->
Generate event
· SWUF Runtime system administration
Administration -> Runtime system
· SWUG Workflow start transactions
Definition tools -> Workflow start
transactions
· SWUI Start workflows From the R/3 initial
screen, choose Office -> Start Workflow
· SWUS Start tasks Runtime tools -> Start
workflow
· SWUY Wizard for message linkage to
workflow Definition tools -> Wizards ->
Create "Call workflow from message"
· SWX1 Create notification of absence
· SWX2 Change notification of absence
· SWX3 Display notification of absence
· SWX4 Approve notification of absence
· SWXF Form applications: Access point
Environment -> Demo examples -> Fill out
form
Reports
SAP Business Workflow Interview Questions
- 114 -
· RSWWWIDE – Delete work items
· RHSOBJCH to fix PD Control Tables
Tables
· SWW_OUTBOX -Lists Workflows in outbox
together with status
· SWW_CONT -Container Contents for
Work Item Data Container
· SWW_CONTOB -Container Cont. for Work
Item Data Container (Only Objects)
· SWWLOGHIST -History of a work item
· SWWORGTASK -Assignment of WIs to
Org.Units and Tasks
· SWWUSERWI -Current Work Items
Assigned to a User
· SWWWIHEAD -Header Table for all Work
Item Types
SAP Business Workflow Interview Questions
- 115 -
SAP Business Workflow Interview Questions
- 116 -
SAP Business Workflow Interview Questions
- 117 -
INDEX
Accessing Tasks ............................................................104
active and passive substitutes.......................................78
Adding functions ............................................................26
agent assignment...............................................47, 70, 83
Alternative Approvers....................................................23
Approval Users ...............................................................28
Approval workflow .........................................................19
Audit Trace......................................................................84
BOR ..................................................................................34
Bus 2080 .........................................................................10
BUS2009 ........................................................................... 7
BUS2012..........................................................................29
BUS2038 ......................................................................... 15
Business Object...............................................................43
change mode
work item.....................................................................55
completing prematurely
workflow ......................................................................10
Complex Email................................................................99
Complex Text..................................................................98
Condition Step ................................................................80
Creating Events...............................................................32
Deadline Agents..............................................................36
Deadline Step................................................................105
Deadline Step Missed ..................................................102
SAP Business Workflow Interview Questions
- 118 -
Debugging .......................................................................43
Dialogue tasks.................................................................75
Display limitation ...........................................................38
Distribution Lists............................................................92
Downloading Workflows...............................................16
Email
workflow triggers......................................................103
Email Notification ..........................................................89
Email Recipients.............................................................96
Emails
sending different versions .......................................101
employee leave request..................................................12
Error Handing ................................................................90
Error Status.....................................................................55
ESS
leave request ...............................................................12
executable attachments..........................................31
EXIT_SAPLEBNF_005 ................................................65
General Task ...............................................................4, 47
Generating index ............................................................39
HR Infotype.....................................................................45
HR object .........................................................................14
Inbox .........................................................3, 4, 26, 72, 110
IW52.................................................................................10
List all Workflows...........................................................57
Maintain Infotype........................................................... 17
Material Change Workflow ...........................................87
material creation ............................................................46
OMGQ..............................................................................21
PB40................................................................................. 15
Performance........................................4, 48, 96, 107, 123
PFAC.................................................................................30
PFTC_CHG .....................................................................24
SAP Business Workflow Interview Questions
- 119 -
Plant Maintenance ......................................................... 15
PO release workflow ......................................................33
PO Release Workflow ....................................................44
Pop up message ..............................................................13
position based .................................................................18
Position Basis ..................................................................18
PPOCE..............................................................................18
PPOME............................................................................18
pproval for new cost center...........................................52
PR Approval
email notification .......................................................50
PR Item release................................................................. 7
Priority Problems ...........................................................40
Purchasing Workflows................................................... 51
Refresh index ..................................................................39
release
level 3 ............................................................................. 7
PR item level................................................................. 7
release strategies.......................................................54
Release Strategies...........................................................54
ReleaseStepCreate..........................................................33
releasing requisitions .....................................................21
Remove object type........................................................20
Replace the user in workflow ........................................68
reports........................................................................... 100
Resend Workflow ...........................................................88
Responsibility ................................................................. 17
Resubmitted WI .............................................................69
Role container value ......................................................83
RSWUWFML..................................................................31
RSWUWFML2................................................................31
RSWUWFMLEC.............................................................89
RSWWDHEX..................................................................69
SAP Business Workflow Interview Questions
- 120 -
SBWP ...............................................................................78
SCDO................................................................................87
SD, Triggering .................................................................38
Send email when invoice is posted ..............................60
Sending Text ...................................................................97
Service notification ........................................................10
SMOS ...............................................................................40
SMQS ...............................................................................48
SO36.................................................................................78
Spool Failure ...................................................................76
Starting Workflow ..........................................................85
Substitution .....................................................................78
substitutions ..............................................................14, 79
SWBP ...............................................................................26
SWDD..............................................................................62
SWDD_CONFIG ............................................................54
SWE2................................................................................23
SWEL ...............................................................................76
SWELS .............................................................................43
SWI5.................................................................................27
SWO1.........................................................................20, 43
SWUE..............................................................9, 23, 43, 86
SWUS ...............................................................................58
SWWWWIHEAD............................................................27
Terminating Events........................................................59
TOJTB..............................................................................20
Triggering events...........................................................66
Triggering Events ...........................................................63
undelete .............................................................................9
URL ..................................................................................95
Use position as agent .....................................................34
User assignment ............................................................. 17
user exit
SAP Business Workflow Interview Questions
- 121 -
not triggering ..............................................................29
User Outbox
transferring .................................................................27
Virtual Attribute.............................................................81
warning message.......................................................41
Warning Message...........................................................41
WE20 ...............................................................................68
WF queries ......................................................................61
WF-BATCH.....................................................................73
WI doesn't get triggered .........................................69
Work Item
notification ..................................................................94
Work item execution......................................................93
Work items
undelete .........................................................................9
work process ...................................................................40
Workflow for IDOC Error .............................................53
Workflow not triggered .................................................23
Workflow problem .........................................................75
Workflow sent to Every Agent......................................24
Workflow Substitution ..................................................35
Workflow without HR....................................................70
workitem....................................28, 41, 54, 56, 62, 67, 72
SAP Business Workflow Interview Questions
- 122 -
SAP Business Workflow Interview Questions
- 123 -
Attention SAP Experts
Writing a book can be the best thing for your
career.
Have you ever considered writing a book in
your area of SAP? Equity Press is the leading
provider of knowledge products in SAP
applications consulting, development, and
support. If you have a manuscript or an idea
of a manuscript, we’d love to help you get it
published!
Please send your manuscript or manuscript
ideas to jim@sapcookbook.com – we’ll help
you turn your dream into a reality.
Or mail your inquiries to:
Equity Press Manuscripts
BOX 706
Riverside, California
92502
Tel (951)788-0810
Fax (951)788-0812
SAP Business Workflow Interview Questions
- 124 -
50% Off your next
SAPCOOKBOOK order
If you plan of placing an order for 10 or more books from
www.sapcookbook.com you qualify for volume discounts.
Please send an email to books@sapcookbook.com or phone
951-788-0810 to place your order.
You can also fax your orders to 951-788-0812
SAP Business Workflow Interview Questions
- 125 -
Interview books are great for
cross-training
In the new global economy, the more you know the better.
The sharpest consultants are doing everything they can to
pick up more than one functional area of SAP. Each of the
following Certification Review / Interview Question books
provides an excellent starting point for your module
learning and investigation. These books get you started like
no other book can – by providing you the information that
you really need to know, and fast.
SAPCOOKBOOK Interview Questions, Answers, and
Explanations
ABAP - SAP ABAP Certification Review: SAP ABAP Interview
Questions, Answers, and Explanations
SD - SAP SD Interview Questions, Answers, and Explanations
Security - SAP Security: SAP Security Essentials
HR - mySAP HR Interview Questions, Answers, and
Explanations: SAP HR Certification Review
BW - SAP BW Ultimate Interview Questions, Answers, and
Explanations: SAW BW Certification Review
SAP SRM Interview Questions Answers and Explanations
Basis - SAP Basis Certification Questions: Basis Interview
Questions, Answers, and Explanations
MM - SAP MM Certification and Interview Questions: SAP MM
Interview Questions, Answers, and Explanations
SAP Business Workflow Interview Questions
- 126 -
SAP BW Ultimate Interview Questions,
Answers, and Explanations
Key Topics Include
• The most important BW settings to
know
• BW tables and transaction code quick
references
• Certification Examination Questions
• Extraction, Modeling and
Configuration
• Transformations and Administration
• Performance Tuning, Tips & Tricks,
and FAQ
• Everything a BW resource needs to
know before an interview
mySAP HR Interview Questions, Answers,
and Explanations
Key topics include:
• The most important HR settings to
know
• mySAP HR Administration tables
and transaction code quick references
• SAP HR Certification Examination
Questions
• Org plan, Compensation, Year End,
Wages, and Taxes
• User Management, Transport
System, Patches, and Upgrades
• Benefits, Holidays, Payroll, and
Infotypes
• Everything an HR resource needs to
know before an interview
SAP Business Workflow Interview Questions
- 127 -
SAP SRM Interview Questions, Answers, and
Explanations
Key Topics Include
-The most important SRM
Configuration to know
-Common EBP Implementation
Scenarios
-Purchasing Document Approval
Processes
-Supplier Self Registration and Self
Service (SUS)
-Live Auctions and Bidding Engine,
RFX Processes (LAC)
-Details for Business Intelligence and
Spend Analysis
-EBP Technical and Troubleshooting
Information
SAP MM Interview Questions, Answers, and
Explanations
- The most important MM
Configuration to know
- Common MM Implementation
Scenarios
- MM Certification Exam Questions
- Consumption Based Planning
- Warehouse Management
- Material Master Creation and
Planning
- Purchasing Document Inforecords
SAP Business Workflow Interview Questions
- 128 -
SAP SD Interview Questions, Answers, and
Explanations
• The most important SD settings to
know
• SAP SD administration tables and
transaction code quick references
• SAP SD Certification Examination
Questions
• Sales Organization and Document
Flow Introduction
• Partner Procedures, Backorder
Processing, Sales BOM
• Backorder Processing, Third Party
Ordering, Rebates and Refunds
• Everything an SD resource needs to
know before an interview
SAP Basis Interview Questions, Answers, and
Explanations
• The most important Basis settings to
know
• Basis Administration tables and
transaction code quick references
• Certification Examination Questions
• Oracle database, UNIX, and MS
Windows Technical Information
• User Management, Transport
System, Patches, and Upgrades
• Backup and Restore, Archiving,
Disaster Recover, and Security
• Everything a Basis resource needs to
know before an interview
SAP Business Workflow Interview Questions
- 129 -
SAP Security Essentials
• Finding Audit Critical Combinations
• Authentication, Transaction Logging,
and Passwords
• Roles, Profiles, and User
Management
• ITAR, DCAA, DCMA, and Audit
Requirements
• The most important security settings
to know
• Security Tuning, Tips & Tricks, and
FAQ
• Transaction code list and table name
references
SAP Workflow Interview Questions,
Answers, and Explanations
• Database Updates and Changing the
Standard
• List Processing, Internal Tables, and
ALV Grid Control
• Dialog Programming, ABAP Objects
• Data Transfer, Basis Administration
• ABAP Development reference
updated for 2006!
• Everything an ABAP resource needs
to know before an interview
SAP Business Workflow Interview Questions
- 130 -

No comments:

Receive All Free Updates Via Facebook.